Packaged Air Conditioning Units

You need a comfortable building environment no matter what the weather is outside. Our packaged air conditioning units and services ensure efficient flow of air throughout your building while keeping energy costs low.

Our Split System and Packaged Air Conditioning Unit Services include: 

Verify Operation
Calibrate and Clean Controllers and Safety Controls
Check Fan Wheel and Clean Dirt Accumulation
Check Thermostatic Expansion Valve
Check for Unrestricted and Proper Operation
Check for Alignment, Balance, and Security to Shaft
Check for Corrosion and Wear
Treat Corrosion as Required
Lubricate Bearings and Check for End Play, Excessive Bearing Temperature and Unusual Bearing Wear
Check Condition of Drive Couplings and Belts
Check and Tighten Mounting Bolts
Check for Proper Belt Tension
Check Rain Shields
Examine Motor Mount Resiliency
Measure and Record Operating Voltage and Current
Test Motor Winding Insulation Resistance
Check for Damage or Leaks
Straighten Bent Fins
Check AMP Draw
Condenser Fan Inspection
Supply Fan Inspection
Verify Coil Cleanliness
Inspect Thermal Bulb for Security
Check and Adjust Superheat
Check for Security in Duct or System
Trace Back Condensate Drain Piping, Checking for Blockage
Verify Economizer or “Free Cooling” Operation
Filter Change
Check for Vibration or Noise
Heating Service with Proper Combustion
Verify AMP Draw on Spring Fan
Burner Check
Sequence Test All Controls
Check Crankcase Heater Operation
Check Refrigerant Charge and Oil Leaks
Perform Acid Test
Observe Bearing and Operating Surface Temperatures
Perform Combustion and Draft Tests
Evaporator Coil Maintenance
Heat Pump (Indoor and Outdoor) Component Maintenance